Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
Posted - 01 Mar 2016 : 09:17:43 In PCAD there is a copper pour setting "Line Width". With a smaller line width there is more detail in the copper pour. Is that equivalent to the "Line Style" setting which i can find in the properties:Poured Copper ? .. or has that setting only to do with how the borders of the copper pour are displayed on my screen and do i have to use an other option for it ?
4 L A T E S T R E P L I E S (Newest First)
Posted - 31 Aug 2016 : 15:30:39 For the sake of keeping related data in one place I'll add my tip about template, its line width and generated copper here.
Currently Pulsonix generates template copper as a polygon defined by center lines of the template lines and then adds a line around this polygon with the width of the template line. I wanted to disable that bounding line generation and it can be achieved by setting template line width to zero. In this case only a polygon is generated.
Posted - 01 Mar 2016 : 20:10:17 Hi Chris,
I feel your pain. When I first got Pulsonix, I had several designs I was under the gun to get done.
I can say, however, that almost everything I needed was in the manual.
So I can say for sure that it's probably in the Online Help somewhere.. it's just a matter of searching for it and reading up.
What would be really nice is if employers would stop having a fire in their britches for every thing -- and let us designer get to know the tools before asking for the world.
Posted - 01 Mar 2016 : 20:06:26 Ok Thanks ! ... and i know i am having a lot of questions and that training can do lot to lower that questions...but one of the reasons to buy Pulsonix was because i was told that stepping over from PCAD to Pulsonix would be easy and that support to step over is very good. With this in mind i started a design job with Pulsonix. Unfortunately there is a lot of time pressure.. so when i get stuck on things i start reading in the manual and start asking questions.. sorry for it. The good thing is that the pcb is almost ready and that i can create gerbers and drill data that looks good. I hope there will be a training in Holland soon..and otherwise i have to come to GB. In the meantime i hope i can post a few more questions :-)
Posted - 01 Mar 2016 : 10:24:38 The Line Style is used to create the copper pour area, so it is effectively the equivalent.