Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
marco.ruggeri
Posted - 17 Mar 2015 : 13:07:19 How can i avoid pad to track error between a net and a starpoint ? (Note that these neet join the startpoint )
7 L A T E S T R E P L I E S (Newest First)
marco.ruggeri
Posted - 23 Mar 2015 : 15:44:54 Ok, it works . Thanks!
steve
Posted - 23 Mar 2015 : 14:05:46 Move the first corner at the end of your first segment leaving the pad origin further than the spacing rules require.
Pulsonix Assistance
marco.ruggeri
Posted - 23 Mar 2015 : 13:22:12 I can't understand which rules are violated ? Can you tell me exactly how can remove the error?
steve
Posted - 23 Mar 2015 : 11:52:04 The DRC was giving errors back as the star point rules were not being obeyed.
Pulsonix Assistance
steve
Posted - 18 Mar 2015 : 09:43:54 The DRC ignores the first segment from the starpoint to the first corner, at the corner DRC is back in action. So that I understand completely your points, please create a simple example design and send through to support.
Pulsonix Assistance
marco.ruggeri
Posted - 18 Mar 2015 : 07:56:53 Yes I know.... but it happens a very strange thing: if 2 tracks that join starpoint starts from a segment of the track an error is found (?!) , otherwise if they start from a pad or a via than there is no error . Why?
steve
Posted - 17 Mar 2015 : 16:38:33 This is detailed within the Help concerning the fact that DRC ignores spacing rule violations for the first segment of connected nets leaving from the star point pad
