Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
cioma
Posted - 10 Aug 2016 : 12:35:27 Does Pulsonix support length matching within differential pair like on this picture?
8.49 KB
It's something like serpentine function but within a diffpair (i.e. only one track is serpentined).
I assume it's possible if differential pairing is removed from a segment of the diffpair and then manually editing that segment but it would be nice to be able to do it without removing deferential pairing.
4 L A T E S T R E P L I E S (Newest First)
tystephens
Posted - 10 Aug 2016 : 14:23:53
quote:Originally posted by cioma
It seems v9 will have a lot of improvements as far as constraint management and high-speed design is concerned.
Indeed - not long now though!
cioma
Posted - 10 Aug 2016 : 14:21:01 Thanks, Steve, it's quite an easy workaround.
It seems v9 will have a lot of improvements as far as constraint management and high-speed design is concerned.
tystephens
Posted - 10 Aug 2016 : 14:18:45 Differential pair skew is part of V9, at present in V8.5, if you wish to increase the length of one side of a differential pair, you would indeed need to 'Remove differential pair' and add the length to the one side.
In V9 you will be able to maintain a differential pair and add length to one side interactively.
Thanks,
Ty
Image Insert: 56.91 KB
steve
Posted - 10 Aug 2016 : 14:15:57 When a serpentine is required to meet a length difference rule it has to go in a track segment as it cant go in the diff segments otherwise they would not be diff paired traces.
For note: Serpentine is going interactive in Version 9.
