Other Spice Simulators

This is a brief overview of the Spice Simulation functionality within Pulsonix.

If you have PulsonixSim, please refer to the PulsonixSim overview page.

From within the Pulsonix Schematic design editor environment you can generate Spice netlists for other Spice products. To change the format and setup optional parameters, you must use the Set Netlist Spice Type option from the Simulation menu.

The Spice output from Pulsonix uses information on Parts to indicate what Spice device they represent, the Spice model to use during the simulation, and how to output them to a Spice netlist (Note: Some exports will run the Simulator directly without you viewing the netlist).

Simulation Functionality

Most of the functions to use for Simulation analysis can be found on the Simulation menu and its many sub-menus, with some of the more commonly used functions have been added to a Simulation toolbar:

Editing Spice Values, Parameters and Model Names

Pressing the F7 key with a selected component will enable yo to edit its Spice Values, Parameters or Model Name. You can also use the Edit Spice Model/Value command from the context menu for a selected component or from the Simulation menu.

Using External Spice Models

Spice models that are available on various web sites on the internet can be used with Pulsonix and can be associated with Pulsonix Parts in the library.

Running Simulation

The design can be simulated by pressing the F9 shortcut key or by selecting Simulate Design from the Simulation menu.

Preparing the Schematic for Simulation

Spice Parts

These Parts can represent circuit stimuli (like voltage and current sources), basic Spice devices (analog and digital), sub-circuits, special Spice functional models and Simulator commands (like Probes and Initial Conditions).

You can set up a Part Spice Type by editing it using the Library Manager and using the Edit Spice button from the Details page. This presents the Define Spice Type dialog to specify the type of device the Part represents.

Example Spice libraries are provided for use within Pulsonix containing Parts that have Spice parameters already defined to help you quickly generate circuits to simulate. These libraries can be used as a guideline to be referenced when creating your own libraries. They can be found in the supplied PulsonixSim and LTSpice Parts library, and corresponding symbol libraries. They contains special Parts for functional modelling, circuit stimuli, probes etc., along with Parts that reference Spice simulator models and subcircuits.

Add the required Parts from these libraries to your schematic using one of the following methods:

Add your circuit stimuli components using the Insert Source sub-menu on the Simulation menu. The menu will contain a list of commonly used source devices.
Add your circuit probe components using the Insert Fixed Probe sub-menu on the Simulation menu. The menu will contain a list of probe Parts representing commonly used simulation plots. The menu also contains a set of simulator control Parts.
For the more commonly used Spice Parts, use the Insert Component option to select Spice Parts from the Spice libraries.
For a structured tree based access to all of the Parts from the Spice library, use the Spice Category within the Part Browser bar.

Editing Spice Parameters

Once added, you can alter the Spice information on the components in your circuit by selecting them and pressing F7, (Edit Spice Model/Value command). For most devices this will display the Select Model dialog to change the model or subcircuit the component refers to and its model parameters, or the Define Passive Device dialog to change the value of resistors, capacitors, inductors etc. There are many more special dialogs that respond to the F7 key for different Spice device types, these are listed below.

Functional Model Devices (F7)

See Functional Modelling for more details.

Analog To Digital Converter
Arbitrary Non-Linear Capacitor
Arbitrary Non-Linear Inductor
Arbitrary Non-Linear Resistor
Bus Register
Counter
Digital To Analog Converter
Logic Gate
Laplace Transfer
Non-Linear Transfer
Shift Register

Editing Spice Devices (F7)

Device Value
Digital Initial Condition
Digital Pulse
Ideal Transformer
Model
Parameters
Parameterised Devices
Passive Devices
Potentiometer

Adding Stimuli and Probes

Connections would be added to the components to create the circuit to be simulated. Insert circuit stimuli by adding voltage and/or current source parts to the circuit. Add fixed voltage and current probe components to the nets and pins that you wish to plot a simulation curve.

Spice Circuit Design Rules

The following design rules must be observed for the simulation to run correctly although most circuits obey them anyway and they do not impose serious limitations on the capability of the simulator.

There must always be at least one ground symbol on every circuit.
Every node on the circuit must have a DC path to ground. If you do have a floating node, connect a high value resistor (e.g. 1G ) between it and ground.
There must not be any zero resistance loops constructed from voltage sources and or inductors. If you do have such loops. insert a low value resistor. It is best to make the resistance as low as is needed to have a negligible effect on your circuit but no lower.
There should be at least two connections at every pin. Connections cannot be left dangling.

Failure to observe the above usually leads to a “Singular Matrix” error.

Analysis Modes for Spice

When the circuit is ready, use the Simulation Parameters option from the Simulation menu to choose the analysis mode.

Starting the Simulation

When everything has been set up, press F9 to run the Simulate Design option, or select it from the Simulation menu. All pages of the schematic will be collated and the entire schematic simulated.

To simulate only parts of a schematic design, use the Simulate Current Page or Simulate Selected Items options on the Simulation toolbar.

A Spice netlist will be generated and sent to the PulsonixSim simulator for analysis. This process may take a few seconds depending on the size of the circuit.

If the design contains fixed probe components, their curves will be plotted in a full graph window. Alternatively you can use the interactive Random Probe facility from the schematic editor Simulation menu.

Netlist Contents

The netlist contains the following:

A Spice description of the circuit

This is a netlist extracted from the schematic design and has the file extension .cir. You won’t see this and won’t need to use it. It is sent to the simulator automatically.
Analysis Mode and Simulation control commands

These are instructions to the simulator to tell it how to perform the simulation of the circuit. They are set up using the Simulation Parameters dialog, described in more detail below. The parameters are held in the schematic design.
Extra Spice data
This is any other information that you wish to include in the netlist, such as simulator controls, local Spice models and other user supplied Spice statements at the end of the Spice netlist.

It is usually used to contain more advanced simulation commands that cannot be set up using the dialogs provided in the Pulsonix program, or to include descriptions of models used in the circuit that either do not exist in the model libraries or have been changed.

The information is text and is set up using the Extra Simulation Data dialog, and is also held in the design.