Sets of rules for Autoplace can be saved to disk for later use. This is described in detail under Autoplace Rule Files on the help page for the main Autoplace dialog.
Documentation
- Change - Net (Schematics)
- Change Area Keep In and Out
- Change Branch Point
- Change Bus
- Change Grid
- Change Layer
- Change Layer Span
- Change Line Style
- Change Net (PCB)
- Change Pad Style
- Change Shape Type
- Change Star Point
- Change Testpoint
- Change Text Alignment
- Change Text Style
- Change Track Style
- Properties - Change Block
- Properties - Change Documentation Symbol
- Properties - Change Part
- Colours - Attributes (PCB)
- Colours - Attributes (SCM)
- Colours - Back Drill
- Colours - Boards & Areas
- Colours - Bus & Connections (SCM)
- Colours - Component Rules
- Colours - Connect Points (SCM)
- Colours - Differential Pairs
- Colours - Documentation Shapes (PCB)
- Colours - Electrical Shapes
- Colours - Highlights (PCB)
- Colours - Highlights (SCM)
- Colours - Layers
- Colours - Nets
- Colours - Others (PCB)
- Colours - Others (SCM)
- Colours - Pads
- Colours - Shapes (SCM)
- Colours - Signal Paths
- Colours - Sub Nets
- Colours - Text (PCB)
- Colours - Text (SCM)
- Colours - Vias
- Colours Overview (PCB)
- Colours Overview (SCM)
- Absolute and Relative Coordinates
- Advanced Technology Option
- Boards with Cavities
- Character Set
- Contacting Pulsonix
- Copyright Notice and Trademarks
- Database Connection
- Embedded Components Overview
- Example Designs
- Getting Help
- Getting Started Straight Away
- Glossary
- Interactive High Speed
- Menu Bar
- New Features in Version 12.5
- New Features in Version 13.0
- New Features in Version 14.0
- Placing The Design
- PLM Option
- Pulsonix Overview
- Routing The Design
- Setting Up Design Technologies
- Shortcut Menus
- System Limits
- Technical Support
- Track and Via Breakouts
- User Interface
- Using dialog grids or tables
- Using Filters
- Using Wizards
- Web Access
- Welcome to Pulsonix
- Zoom Controls Overview
- Design Settings - Defaults - Area
- Design Settings - Defaults - Attribute
- Design Settings - Defaults - Bitmap
- Design Settings - Defaults - Block (PCB)
- Design Settings - Defaults - Block (SCM)
- Design Settings - Defaults - Board
- Design Settings - Defaults - Bond Pad
- Design Settings - Defaults - Branch Point
- Design Settings - Defaults - Breakout
- Design Settings - Defaults - Bus
- Design Settings - Defaults - Component
- Design Settings - Defaults - Connection (SCM)
- Design Settings - Defaults - Construction Line
- Design Settings - Defaults - Copper
- Design Settings - Defaults - Die Pad
- Design Settings - Defaults - Dimension
- Design Settings - Defaults - Dimension Units
- Design Settings - Defaults - Doc Shape
- Design Settings - Defaults - Embedded View
- Design Settings - Defaults - Error
- Design Settings - Defaults - Junction
- Design Settings - Defaults - Layer
- Design Settings - Defaults - Mounting Hole
- Design Settings - Defaults - Net
- Design Settings - Defaults - Net Styles
- Design Settings - Defaults - Origin
- Design Settings - Defaults - Pad
- Design Settings - Defaults - Panel Outline
- Design Settings - Defaults - Pin
- Design Settings - Defaults - Report Symbol
- Design Settings - Defaults - SMD Pad
- Design Settings - Defaults - Star Point
- Design Settings - Defaults - Sub Net
- Design Settings - Defaults - Template
- Design Settings - Defaults - Testpoint
- Design Settings - Defaults - Text
- Design Settings - Defaults - Text Callout
- Design Settings - Defaults - Track
- Design Settings - Defaults - Variant
- Design Settings - Defaults - Via
- Design Settings - Defaults - Wire
- Design Settings - Placement Sites
- Inserted Graph
- Design Settings - Coordinate System
- Design Settings - General
- Design Settings - Naming (PCB)
- Design Settings - Naming (SCM)
- Design Settings - Synchronisation
- Data Transfer Wizard - Parts
- Data Transfer Wizard - PCB Designs
- Data Transfer Wizard - PCB Footprints
- Data Transfer Wizard - PCB Profiles
- Data Transfer Wizard - PCB Technology Files
- Data Transfer Wizard - Schematic Designs
- Data Transfer Wizard - Schematic Profiles
- Data Transfer Wizard - Schematic Symbols
- Data Transfer Wizard - Schematic Technology Files
- Align
- Capture Window
- Clip Construction Line
- Component Variant Spreadsheet
- Copy
- Create Breakout Tabs
- Cross Probe
- Cut
- Cut Shape
- Cut To Block
- Cut Track
- Delete
- Display Power Plane
- Drag & Drop Attribute Text
- Duplicate
- Edit Attributes Spreadsheet
- Find Relative Origin
- Find XY Position
- First Error
- Highlight Selection
- Measure
- Paste
- Redo
- Remove Breakout Tabs
- Remove Highlights
- Replicate
- Resolve Net Names
- Resolve Net Names - Dialog Detail
- Type Coordinate and Type Offset and Type Pin Name and Copy With Offset
- Type Pin Name
- Undo
- Application Error
- Back Annotate
- Choose Folder
- Close
- Enable Dynamic Checking
- Exit
- Files Of Type
- Import ECO
- New - Designs, Technologies & Profiles, Wizards
- Open
- Open and Close Pages
- Part Technology
- PCB Design Editor
- PCB Design Wizard
- PCB Documentation Symbol Type
- PCB Footprint
- PCB Profile
- PCB Technology
- Print to PDF
- Printing
- Recent Files
- Save and Save All
- Save As and Save Copy As
- Save Configuration
- Save Technology
- Save To Documentation Symbol Library
- Save To Library
- Schematic Documentation Symbol Type
- Schematic Profile
- Schematic Technology
- Schematics Design Editor
- Schematics Symbol Editor
- Switch between Schematic and PCB
- Technology Files
- Import Component Placement CSV Data
- Import DXF
- Import Gerber
- Import Pin Data in to the Part Editor
- Importing Altium Designer and Protel Schematic Designs
- Importing Altium Designer Files
- Importing Ariadne Designs
- Importing Ariadne Schematic Designs
- Importing Cadence Allegro Designs and Libraries
- Importing Cadstar Files
- Importing DxDesigner Designs
- Importing DxDesigner Files
- Importing Eagle Designs
- Importing Eagle Files
- Importing Eagle Files using ULP Files
- Importing EDIF 2.0.0 Format Files
- Importing EDWin ASCII Databases
- Importing EDWin Databases
- Importing Electronic Workbench and MultiSIM Files
- Importing Footprint Libraries From Other Systems
- Importing IDF Files
- Importing Integra Files
- Importing Integra Projects
- Importing Netlists to create a new PCB
- Importing OrCAD Designs
- Importing OrCAD Files
- Importing PADS Files
- Importing PADS Schematic Designs
- Importing Part and Net data from CSiEDA Schematics
- Importing Parts Libraries From Other Systems
- Importing PCB Designs From Accel and P-CAD
- Importing PCB Designs From Altium Designer and Protel
- Importing PCB Designs From Ariadne
- Importing PCB Designs From Cadstar using CPA format
- Importing PCB Designs From Other Systems
- Importing PCB Designs From Other Systems
- Importing PCB Designs From P-CAD using the PDIF format
- Importing PCB Designs From PADS
- Importing PLX Files into Pulsonix
- Importing Protel Files
- Importing Schematic Designs From Other Systems
- Importing Schematic Designs From Other Systems
- Importing Schematic Designs From P-CAD using the PDIF format
- Importing Seica Netlist
- Importing Symbol Libraries From Other Systems
- Importing System Designer Designs
- Importing Ultimate Files
- Importing Viewdraw Files
- Importing Visula Cadif
- Importing Visula Cadif Designs
- Importing Viva Attributes
- Mapping Ariadne Layers
- Mapping Cadif Layers
- Mapping EDA System Layers
- Part Mapping Editor
- Choose Bus Net
- Connect Guides
- Default Profiles
- Generate Block Symbol Specification
- Hierarchy Overview
- Hyperlink Attributes
- Insert - Inserted Graph
- Insert - Mounting Hole
- Insert - Testpoint
- Insert Area
- Insert Attribute
- Insert Attribute Position
- Insert Bitmap
- Insert Block Instance
- Insert Block Port
- Insert Board
- Insert Board Origin
- Insert Bond Pad
- Insert Branch Point
- Insert Breakout
- Insert Bus
- Insert Bus Reference
- Insert Bus Route
- Insert Bus Route
- Insert Circle
- Insert Component (SCM)
- Insert Component Name
- Insert Connection (PCB)
- Insert Connection (Schematic)
- Insert Connector Pin
- Insert Construction Line
- Insert Copper
- Insert Cutout
- Insert Die Pad
- Insert Drill Table
- Insert Ellipse
- Insert Embedded View
- Insert Flexi Bend Line
- Insert Free Pad
- Insert Layer Stack Preview
- Insert Line
- Insert Multiple Items
- Insert Net Label
- Insert Pad
- Insert Page
- Insert Page Link
- Insert Panel Outline
- Insert PCB Component
- Insert PCB Design
- Insert PCB DOC (Documentation) Symbol
- Insert Pin
- Insert Polygon
- Insert Rectangle
- Insert Schematic Doc (Documentation) Symbol
- Insert Shape Item
- Insert Shapes Overview
- Insert Signal Reference
- Insert Spiral
- Insert Spline
- Insert Star Point
- Insert Template
- Insert Text
- Insert Text Callout
- Insert Track
- Insert Triangle
- Insert User Report
- Insert Via
- Insert Wave
- Insert Wire Link
- Linking Schematics Pages
- Merge
- Multi Connect
- Save Profile
- Select Block Port
- System Attributes
- Add To Net
- Apply Predefined Signals
- Auto Correct Track
- Change Rotation Step
- Check Out Part and Footprint and Symbol (From Vault) And Edit
- Closed Shape
- Command
- Curved Mitre
- Default Keys
- Define Functional Logic Names
- Deselect All
- Differential Pairs
- Disconnect Connection End
- Disconnect Track End
- Edit Arc
- Edit Attribute Value
- Edit Breakout
- Edit Bus
- Edit Footprint In Library
- Edit Mode
- Edit Part In Library
- Edit Schematic Connection
- Edit Segment
- Edit Segment Menu
- Edit Shape
- Edit Symbol In Library
- Edit Symbol In Place
- Edit Track
- Edit Track Width using Impedance Value
- Fetch Component
- Filled Shape
- Find Library Item
- Flip Selection
- Frame Select
- Free Pads to Vias
- Import Functional Logic Names
- Latch Mode
- Magnifier
- Manual Placement
- Manual Routing
- Merge Shapes
- Mitre and Fillet Corner
- Mouse Wheel Button
- Move
- Move Corner
- Move To Bin
- Next Part Representation
- Place Inserted Graph
- Polygon Select
- Rearrange Multiple Items
- Remove From Net
- Replicate Shape As
- Reposition Design
- Reset Panel Layout
- Resize Shape
- Restricted Segment Movement
- Rotate
- Scale
- Select All
- Select All Gates
- Select All Visible
- Select Mode
- Select Next
- Select Path
- Select Pin Network Pin
- Select Previous
- Shape Editing Overview
- Sketch Track
- Split Nets
- Swap Layer
- To Mounting Hole
- Type Rotate
- Use Default Track and Via Style
- Wildcard Wizard
- Wildcards
- Creating and Editing a 3D Package
- Edit 3D Package
- Folder Name
- Legacy 3D View
- Libraries - Copy and Move Items
- Libraries - Find Footprints
- Libraries - Find Footprints in 3D Packages
- Libraries - Find Symbols
- Libraries - Make Libraries from Parts
- Libraries - Parts
- Libraries - Parts Library Attributes
- Libraries - Parts Library Report
- Libraries - PCB Doc Symbols
- Libraries - PCB Footprints
- Libraries - Rename Items
- Libraries - Schematic Doc Symbols
- Libraries - Schematic Symbols
- Libraries - Spice Models
- Libraries - Swap Symbols
- Libraries - Symbol Library Report
- Libraries Overview
- Library Manager - 3D Packages
- Library Toolkit
- Loading And Using Libraries
- Regenerate Footprint Library Indexes
- Regenerate Part Library Indexes
- Rename Style
- Save Items To Library
- Schematic Doc Symbol Editor
- Using PCB Libraries
- Using Schematic Libraries
- Auto Corner
- Auto Necking
- Display DRC Clearances
- Online DRC Errors
- Options - Design Backups
- Options - Display
- Options - Edit Breakout
- Options - Edit Connection (SCM)
- Options - Edit File Extensions
- Options - Edit Shape
- Options - Edit Track
- Options - File Extensions
- Options - Find
- Options - General
- Options - Interaction (PCB)
- Options - Interaction (SCM)
- Options - Macros
- Options - Move
- Options - Multi-Screen
- Options - Online DRC
- Options - Online ERC
- Options - Pan & Zoom (PCB)
- Options - Resolve Net Names
- Options - Select
- Options - Synchronise
- Options - Tooltips
- Options - Track Length Limits
- Options - Warnings
- Orthogonal Mitre
- Safeguard Your Data With Backups
- Segment Mode
- Setting Up User Defined Options
- Warnings
- CAM Plot - Plot Settings
- Composite Plots
- Excellon Setup
- Export ODB++
- Final Design Checks Before Manufacturing
- IDF Output
- Interactive HTML BOM Export
- Output CAM and Plot
- Output GenCAD
- Output HyperLynx
- Output STL
- Output UniDAT
- PDF Setup
- Pen Colour Setup
- Pen Count Setup
- Pen Plot Setup
- Plot Overview
- Plot Position and Preview
- Plot Warnings
- Plotting The Design
- Split Power Planes
- Step and Repeat in CAM Plots
- Windows Setup
- Check Pin Mappings
- CSV Pin Data
- FPGA Support in Pulsonix
- Part Family
- Parts Editor
- Parts Editor - Add Attribute
- Parts Editor - Associated Parts
- Parts Editor - Change Gate Order
- Parts Editor - Change Gate Symbol
- Parts Editor - Change Part Type
- Parts Editor - Change Representation Order
- Parts Editor - Delete Attribute
- Parts Editor - Details
- Parts Editor - Edit Footprints
- Parts Editor - Edit Pin Count
- Parts Editor - Force Attribute Visibility
- Parts Editor - Gates
- Parts Editor - Insert Gate
- Parts Editor - Insert Part Representation
- Parts Editor - Mapping Multiple PCB Pads to the same SCM Pin
- Parts Editor - Name Pins by Row and Col
- Parts Editor - Parts & Attributes
- Parts Editor - Pins
- Parts Editor - Update Part
- Properties
- Properties - (Item) Attribute
- Properties - Add and Edit Attribute
- Properties - Add Net to Bus
- Properties - Alternate Part From Family
- Properties - Area
- Properties - Associated Parts in a Design
- Properties - Associated Parts on Components
- Properties - Attributes
- Properties - Back Drill
- Properties - Bitmap
- Properties - Block Instance
- Properties - Block Instance - Block
- Properties - Block Instance - Block Instance
- Properties - Block Ports
- Properties - Board
- Properties - Board 3D Origin
- Properties - Board Bend Line
- Properties - Board Origin
- Properties - Branch Point
- Properties - Branch Point Symbol
- Properties - Breakout
- Properties - Bus
- Properties - Bus Route
- Properties - Bus Terminal
- Properties - Comp Attributes
- Properties - Component
- Properties - Component Variants
- Properties - Component Via
- Properties - Connector Pin
- Properties - Construction Line
- Properties - Coordinate System Origin
- Properties - Differential Pair
- Properties - Dimension
- Properties - Dimension Arrows
- Properties - Dimension Doc Lines
- Properties - Dimension Text
- Properties - Dimension Tolerance
- Properties - Documentation Symbol
- Properties - Drill Table
- Properties - Edit Associated Parts
- Properties - Embedded View
- Properties - Error (PCB)
- Properties - Error (SCM)
- Properties - Gate
- Properties - Group
- Properties - Inserted Graph
- Properties - Junction
- Properties - Line Style
- Properties - Mounting Hole
- Properties - Net (SCM)
- Properties - Net Attributes
- Properties - Nets on Pins
- Properties - Pad
- Properties - Panel PCB Design
- Properties - Panel PCB Instance
- Properties - PCB Connection
- Properties - PCB Net
- Properties - PCB Panel Origin
- Properties - Pin
- Properties - Relative Coordinate Origin
- Properties - SCM Connection
- Properties - SCM Doc Symbol and Signal Reference Pin
- Properties - Scm Hierarchy Block - Block
- Properties - Segment
- Properties - Serpentine
- Properties - Shape
- Properties - Signal Path
- Properties - Signal References
- Properties - Star Point
- Properties - Star Point Symbol
- Properties - Sub Net
- Properties - Symbol Origin
- Properties - Teardrop
- Properties - Template
- Properties - Test
- Properties - Text
- Properties - Text Callout
- Properties - Text Style
- Properties - Track
- Properties - Ungated Pins
- Properties - User Report
- Properties - Variant Attributes
- Properties - Variants
- Properties - Vault
- Properties - Via
- Properties - Wire
- Report Maker - Angle Units Command
- Report Maker - Append Report Command
- Report Maker - Area Commands
- Report Maker - Associated Parts Commands
- Report Maker - Attribute Command
- Report Maker - Attribute In Library Commands
- Report Maker - Back Drill Span Commands
- Report Maker - Blank Line Command
- Report Maker - Block Name and Block Instance Name Command
- Report Maker - Comment Command
- Report Maker - Common Dialog Details
- Report Maker - Component Name and Footprint Name and Part Name and Symbol Name Commands
- Report Maker - Component Name Range Command
- Report Maker - Component Name Stem Command
- Report Maker - Coordinate Units Command
- Report Maker - CSV Command
- Report Maker - Database Check Command
- Report Maker - Database Status Command
- Report Maker - Database Value Command
- Report Maker - Default Footprint Name Command
- Report Maker - Differential Pair Commands
- Report Maker - Drawing Commands
- Report Maker - Drill Commands
- Report Maker - Edit Fixed Command
- Report Maker - Edit Get Name Command
- Report Maker - Edit List Command
- Report Maker - Edit List Field Command
- Report Maker - Edit List of Designs
- Report Maker - Edit Value Command
- Report Maker - End Node and Start Node Commands
- Report Maker - End Of Line Command
- Report Maker - Error Commands
- Report Maker - Excel Command
- Report Maker - Extents Command
- Report Maker - Finish and Cancel Report Commands
- Report Maker - Fixed Column Output Command
- Report Maker - Format Description Command
- Report Maker - Gates Command
- Report Maker - Group Commands
- Report Maker - HTML Command
- Report Maker - HTML Heading Text Command
- Report Maker - HTML Image Command
- Report Maker - HTML Table Command
- Report Maker - IF, ELSE commands
- Report Maker - Is Command
- Report Maker - Layer Command
- Report Maker - Layer Commands
- Report Maker - Layer Span Commands
- Report Maker - Length Command
- Report Maker - Library Item Fields
- Report Maker - Line Length Command
- Report Maker - Line Number Command
- Report Maker - List Ascii File Lines Command
- Report Maker - List Component Group Command
- Report Maker - List Count Command
- Report Maker - List of Command
- Report Maker - List of Designs Command
- Report Maker - List of Files Command
- Report Maker - Logic Name Command
- Report Maker - Multi Line Text Command
- Report Maker - Net and Sub Net Commands
- Report Maker - Net Name, Net Class and Net Type Commands
- Report Maker - New Line If Full Command
- Report Maker - New Report Format
- Report Maker - Node Name Command
- Report Maker - Not Unicode Command
- Report Maker - Number Format Command
- Report Maker - Options
- Report Maker - Pad and Type Command
- Report Maker - Pad Attribute Command
- Report Maker - Pad Style Command
- Report Maker - Page Name and Page Number Commands
- Report Maker - Panel Design Commands
- Report Maker - Part Representations, Gates and Pins
- Report Maker - PCB Design Level Commands
- Report Maker - PDC Record Command
- Report Maker - PDF Command
- Report Maker - Pin Count Command
- Report Maker - Position Command
- Report Maker - Report File Name Command
- Report Maker - Report Prompt
- Report Maker - Rotation Commands
- Report Maker - Rule Check Command
- Report Maker - Rules Commands
- Report Maker - Run Report Command
- Report Maker - Scale Command
- Report Maker - Selection Command
- Report Maker - Set Alternate Attributes
- Report Maker - Set Clip Area
- Report Maker - Set Layer
- Report Maker - Set Report Group
- Report Maker - Shape Commands
- Report Maker - Side Command
- Report Maker - Signal Path Commands
- Report Maker - Specialised Part Fields
- Report Maker - Standard Report Header Command
- Report Maker - Step And Repeat Command
- Report Maker - Testpoint Name Command
- Report Maker - Text Command
- Report Maker - Top and Bottom Height Commands
- Report Maker - Track Length Commands
- Report Maker - Transform Coordinates Command
- Report Maker - Types of Command
- Report Maker - Underline Command
- Report Maker - Value Detail
- Report Maker - Variable Command
- Report Maker - Variants Commands
- Report Maker - Vault Commands
- Report Maker - Via Commands
- Report Maker - View Report Command
- Report Maker - While Command
- Report Maker - Width and Height Commands
- Report Maker Commands
- Report Maker Overview
- Define Source
- Pulsonix Spice Simulation - Overview
- Simulation - Autoplace Bias Voltage Markers
- Simulation - Bias Annotation
- Simulation - Create Netlist As Subcircuit
- Simulation - Define AC Source
- Simulation - Define Analog To Digital Converter
- Simulation - Define Block Spice Type
- Simulation - Define Bode Plot Probe
- Simulation - Define Bus Probe
- Simulation - Define Bus Register
- Simulation - Define Component Value
- Simulation - Define Counter
- Simulation - Define DC Source
- Simulation - Define Digital Initial Condition
- Simulation - Define Digital Pulse
- Simulation - Define Digital To Analog Converter
- Simulation - Define Ideal Transformer
- Simulation - Define Laplace Device
- Simulation - Define Logic Gate
- Simulation - Define Noise Source
- Simulation - Define Potentiometer Values
- Simulation - Define Probe
- Simulation - Define PWL Source
- Simulation - Define Random Probe
- Simulation - Define Saturable Transformer and Inductor
- Simulation - Define Shift Register
- Simulation - Define Simulator Control
- Simulation - Define Spice Pin Properties
- Simulation - Define Spice Template
- Simulation - Define Spice Type
- Simulation - Define Transmission Line Parameters
- Simulation - Define Value
- Simulation - Define Waveform Generator
- Simulation - Delete Bias Voltage Markers
- Simulation - Edit Parameter
- Simulation - Edit Spice Value Text
- Simulation - Export LTSpice Netlist
- Simulation - Extra Simulation Data
- Simulation - Functional Modelling
- Simulation - Hide Bias Voltage Values
- Simulation - Import Models
- Simulation - Insert Bias Current Marker
- Simulation - Insert Bias Voltage Marker
- Simulation - Insert Part Using Model
- Simulation - Match Components
- Simulation - Monte Carlo
- Simulation - Monte Carlo Tolerances
- Simulation - Old Method of Defining Saturable Devices
- Simulation - Parameterised Devices
- Simulation - Plot Histogram
- Simulation - Random Probing
- Simulation - Saturable Magnetic Devices
- Simulation - Select Model
- Simulation - Set Match Tolerance
- Simulation - Set Netlist Spice Type
- Simulation - Set Tolerance
- Simulation - Show Spice Value
- Simulation - Simulation Parameters
- Simulation - Simulator Setup Dialog
- Simulation - Update Bias Voltage Values
- Spice Simulation - Overview
- Specctra Wizard - Breakout
- Specctra Wizard - Choose Layers
- Specctra Wizard - Defaults (Grids)
- Specctra Wizard - Files
- Specctra Wizard - Finish
- Specctra Wizard - Mitre
- Specctra Wizard - Nets
- Specctra Wizard - Pin to Pin Limits
- Specctra Wizard - Protect
- Specctra Wizard - Routing Costs
- Specctra Wizard - Routing Types
- Specctra Wizard - Start
- Specctra Wizard - Testpoints
- 3D - Detect Clashes
- 3D - Exploded View
- 3D - Measure
- 3D Connexion Space Mouse
- Board Bending in 3D Overview
- Flexi Bend Lines
- Fold Board option
- Fold Flexi Boards option
- Generate Height Attributes From STEP Models
- IDX Collaboration
- IDX Collaboration Settings
- IDX Layer Mapping
- IDX Workflow
- Importing Component Position Changes from a STEP file
- Library Manager - STEP Models
- Output STEP File
- Position STEP Model
- Save STEP Models
- STEP - Moving items
- Using STEP Models and Attributes
- Using the 3D Viewer Functionality - Getting Started
- Allowed Drill Sizes
- Autogenerate CAM Plots
- Autogenerate CAM Plots
- Back Drilling Overview
- CAM Plots
- CAM Plots - Schematic
- Create Signal Path In Design
- Drill Size Table
- Merge Styles
- New Chain - Differential Pair Chains
- Select Pin Network Part
- Styles and Spacings and Rules By Area
- Technology - Adjacent Nets Rules
- Technology - Anti Pad Rules
- Technology - Area Attribute Rules
- Technology - Area Rules
- Technology - Attribute Names
- Technology - Back Drill Auto Generate
- Technology - Back Drill Rules
- Technology - Back Drill Spans
- Technology - Barcode, QR Code, Data Matrix Code Text Fonts
- Technology - Component Place Rules
- Technology - Component Variants Rules (SCM)
- Technology - Connection Style Naming
- Technology - Connection Styles
- Technology - Copper Antennae Rules
- Technology - Copper Check Rules
- Technology - Copper Neck Width Rules
- Technology - Copper Pour Rules
- Technology - Create Signal Path Dialog
- Technology - Create Sub Net Dialog
- Technology - Creepage Rules
- Technology - Define Pad Shape
- Technology - Differential Pair - Create Pairs From Rules
- Technology - Differential Pair Gap Rules
- Technology - Differential Pair Net Rules
- Technology - Differential Pair Skew Rules
- Technology - Differential Pairs
- Technology - Edit Footprint Rules Attribute
- Technology - Edit Pin Network Part
- Technology - Edit Pin Type Pair Rule
- Technology - Export and Import Layers
- Technology - Export and Import Rules
- Technology - Footprint Rules
- Technology - Footprint Rules Details
- Technology - Group Names
- Technology - Hatch Style Naming
- Technology - Hatch Styles
- Technology - Layer Change Length
- Technology - Layer Class
- Technology - Layer Spans
- Technology - Layer Stack Preview
- Technology - Layers
- Technology - Line Style Naming
- Technology - Line Styles
- Technology - Loop Antennae Rules
- Technology - Materials
- Technology - Navigating Technology Grids and Dialogs
- Technology - Necked Length Rules
- Technology - Net Classes
- Technology - Net Items
- Technology - Net Names (PCB)
- Technology - Net Names (SCM)
- Technology - Net Styles
- Technology - Pad Style Naming
- Technology - Pad Styles
- Technology - Pad Styles Naming Settings
- Technology - Pad Track Neck Rules
- Technology - Pin Networks
- Technology - Pin Style Naming
- Technology - Pin Styles
- Technology - Pin Styles Naming Settings
- Technology - Pin Type Pair Rules
- Technology - Pin Types
- Technology - Reset Layer Class Values
- Technology - Return Path Rules
- Technology - Rules
- Technology - Rules and Attributes
- Technology - Serpentine Rules
- Technology - Signal Paths
- Technology - SMD Rules
- Technology - Spacing Rules
- Technology - Stub Routing Length Rules
- Technology - Style Naming
- Technology - Style Naming Rules
- Technology - Sub Nets
- Technology - Suppress Land Rules
- Technology - Teardrop Rules
- Technology - Testpoint Rules
- Technology - Text Style Naming
- Technology - Text Styles
- Technology - Thermal Rules
- Technology - Track And Via Size Limit Rules
- Technology - Track Impedance Rules
- Technology - Track Length Factor Rules
- Technology - Track Length Match Rules
- Technology - Track Length Rules
- Technology - Track Parallel Rules
- Technology - Track RF Rules
- Technology - Track Style Naming
- Technology - Track Styles
- Technology - Via Rules
- Technology Overview
- Using Schematic Technology Track & Via Size Limit Rules to Create Net Styles in PCB
- API
- Apply Layout Pattern
- Auto Footprints
- Auto Gate and Pin Swap
- Auto Mitre
- Create Breakout Pattern
- Customise - Application Look
- Customise - Edit Button Image
- Customise - Toolbar and Menu Button Appearance
- Customise Dialog Overview
- Design Revision Analyser
- Design Rule Check
- Design Rule Check in Panel Editor
- Electrical Rules Check
- Fatten and Neck Track
- Generate Component
- Join Open Shapes
- Mounting Hole to Pad
- Optimise Gates
- Place Around Board
- Pull Tight Tracks
- Rename
- Replace Part
- Reverse Engineer
- Run Command
- Run Script
- Running Python Scripts
- Serpentine Routing
- Show and Hide Attribute Name Columns
- Smooth Tracks
- Synchronise Designs
- Translate To PCB
- Using Autorouters With Pulsonix
- Apply Vias and Pads
- Browse Nets Dialog
- Clear Template
- Conversion Calculator
- Delete Unfinished Tracks
- Groups
- Hatch
- Heat Sink Calculator
- Load Attribute From Library
- Lock
- Optimise Nets
- Ordered Template Pour
- Place Bond Pads
- Pour Copper
- Pour Copper Locked Items Dialog
- Reload Block
- Reload From Library
- RLCF Calculator
- Scientific Calculator
- Set Pour Order
- Share PCB Tracks or Schematic Connections
- Show and Hide Net Names
- Spread Out
- Swap Component Positions
- Swap Gates
- Swap Pins
- Track Impedance Calculator
- Track Width Calculator
- Trim or Extend Segment
- Unlock
- Unroute Nets
- Update Back Drills
- Update Drill Tables
- Update Layer Stack Previews
- Update User Reports
- Via Resistance Calculator
- Check Out Library Item
- Copy Out Library Item
- Vault - Attributes
- Vault - Audit Trail
- Vault - Browse Associated Design
- Vault - Browse Folder
- Vault - Change ODBC Driver
- Vault - Check In Library Item
- Vault - Check Into Vault
- Vault - Check Out Design Item
- Vault - Check Out From Vault
- Vault - Choose Library
- Vault - Colours
- Vault - Copy Out
- Vault - Copy Out Design Item
- Vault - Designs to Vault
- Vault - Detach From Vault
- Vault - Enter Next Vault Revision
- Vault - Enter Vault Item to be Replaced
- Vault - Export Vault Libraries
- Vault - Folder Name
- Vault - Generic Files to Vault
- Vault - Groups
- Vault - Import Vault Libraries
- Vault - Item Permissions
- Vault - Item Status
- Vault - Libraries to Vault
- Vault - Options
- Vault - Overview
- Vault - Reports
- Vault - Revision Naming
- Vault - Sign In
- Vault - Status
- Vault - Uncheck From Vault
- Vault - Update Cross References
- Vault - Users
- Vault - Version
- Vault - View Global Permissions
- Vault Browser
- Vault Browser - Add PCB From Vault
- Vault Browser - Search
- Vault Folders
- Vault Installation and Getting Started
- Colour Files Bar
- Component Bin
- Design Browser
- Dockable Windows
- DRC Errors Browser
- ERC Errors Bar
- Find Bar
- Frame View
- Full Screen Mode
- Inspector Bar
- Inspector Bar - Change Group Order
- Layers Bar
- Pan
- Part Browser
- Part Browser - Part Browser Categories
- Previous View
- Repaint
- Reverse Layer Order
- Reversed View
- Rules Spreadsheet Bar
- Scroll Bars
- Select Mask Bar
- Shape Information Bar
- Status Bar
- Swap View
- Toggle Layer
- Toggle Layers Bar
- Toolbars
- View Actual Size
- View Board
- View Extents
- View Highlighted
- View Selection
- Workbook Mode
- World View
- Zoom In
- Zoom Out