Use this to change the values of the selected potentiometer components.
These components have their Spice Type set to use the Potentiometer built-in function.
Shortcuts
Default Keys: F7
Default Menu: Simulation
Command: Edit Spice Value/Model
How To Define Potentiometer Values
Select the Potentiometer(s) that you wish to change.
Press F7 or use the Edit Spice Value/Model option from the Simulation menu, or from the shortcut menu.
The following dialog will be displayed:-
Resistance
Type in the resistance of the Potentiometer, or use the spin control to alter the value in steps.
Wiper Position
Type in a value for the wiper between 0 and 1.
Wiper Step Size
The potentiometer wiper position may also be altered using the Increment Spice Value or Decrement Spice Value commands while the device is selected. These default to the shift up and shift down keys. Edit the Wiper Step Size to alter the step size used for this feature.
Run Simulator (after wiper position changed)
Check this box if you wish a new simulation to be run immediately after the wiper position is changed, either in the dialog or by using the increment and decrement commands mentioned above. The simulation will be run only if the simulator is already running.