Use this dialog to set a variable.
Documentation
- Change - Net (Schematics)
- Change Area Keep In and Out
- Change Branch Point
- Change Bus
- Change Grid
- Change Layer
- Change Layer Span
- Change Line Style
- Change Net (PCB)
- Change Pad Style
- Change Shape Type
- Change Star Point
- Change Testpoint
- Change Text Alignment
- Change Text Style
- Change Track Style
- Properties - Change Block
- Properties - Change Documentation Symbol
- Properties - Change Part
- Colours - Attributes (PCB)
- Colours - Attributes (SCM)
- Colours - Back Drill
- Colours - Boards & Areas
- Colours - Bus & Connections (SCM)
- Colours - Component Rules
- Colours - Connect Points (SCM)
- Colours - Differential Pairs
- Colours - Documentation Shapes (PCB)
- Colours - Electrical Shapes
- Colours - Highlights (PCB)
- Colours - Highlights (SCM)
- Colours - Layers
- Colours - Nets
- Colours - Others (PCB)
- Colours - Others (SCM)
- Colours - Pads
- Colours - Shapes (SCM)
- Colours - Signal Paths
- Colours - Sub Nets
- Colours - Text (PCB)
- Colours - Text (SCM)
- Colours - Vias
- Colours Overview (PCB)
- Colours Overview (SCM)
- Absolute and Relative Coordinates
- Advanced Technology Option
- Boards with Cavities
- Character Set
- Contacting Pulsonix
- Copyright Notice and Trademarks
- Database Connection
- Embedded Components Overview
- Example Designs
- Getting Help
- Getting Started Straight Away
- Glossary
- Interactive High Speed
- Menu Bar
- New Features in Version 12.5
- New Features in Version 13.0
- New Features in Version 14.0
- Placing The Design
- PLM Option
- Pulsonix Overview
- Routing The Design
- Setting Up Design Technologies
- Shortcut Menus
- System Limits
- Technical Support
- Track and Via Breakouts
- User Interface
- Using dialog grids or tables
- Using Filters
- Using Wizards
- Web Access
- Welcome to Pulsonix
- Zoom Controls Overview
- Design Settings - Defaults - Area
- Design Settings - Defaults - Attribute
- Design Settings - Defaults - Bitmap
- Design Settings - Defaults - Block (PCB)
- Design Settings - Defaults - Block (SCM)
- Design Settings - Defaults - Board
- Design Settings - Defaults - Bond Pad
- Design Settings - Defaults - Branch Point
- Design Settings - Defaults - Breakout
- Design Settings - Defaults - Bus
- Design Settings - Defaults - Component
- Design Settings - Defaults - Connection (SCM)
- Design Settings - Defaults - Construction Line
- Design Settings - Defaults - Copper
- Design Settings - Defaults - Die Pad
- Design Settings - Defaults - Dimension
- Design Settings - Defaults - Dimension Units
- Design Settings - Defaults - Doc Shape
- Design Settings - Defaults - Embedded View
- Design Settings - Defaults - Error
- Design Settings - Defaults - Junction
- Design Settings - Defaults - Layer
- Design Settings - Defaults - Mounting Hole
- Design Settings - Defaults - Net
- Design Settings - Defaults - Net Styles
- Design Settings - Defaults - Origin
- Design Settings - Defaults - Pad
- Design Settings - Defaults - Panel Outline
- Design Settings - Defaults - Pin
- Design Settings - Defaults - Report Symbol
- Design Settings - Defaults - SMD Pad
- Design Settings - Defaults - Star Point
- Design Settings - Defaults - Sub Net
- Design Settings - Defaults - Template
- Design Settings - Defaults - Testpoint
- Design Settings - Defaults - Text
- Design Settings - Defaults - Text Callout
- Design Settings - Defaults - Track
- Design Settings - Defaults - Variant
- Design Settings - Defaults - Via
- Design Settings - Defaults - Wire
- Design Settings - Placement Sites
- Inserted Graph
- Design Settings - Coordinate System
- Design Settings - General
- Design Settings - Naming (PCB)
- Design Settings - Naming (SCM)
- Design Settings - Synchronisation
- Data Transfer Wizard - Parts
- Data Transfer Wizard - PCB Designs
- Data Transfer Wizard - PCB Footprints
- Data Transfer Wizard - PCB Profiles
- Data Transfer Wizard - PCB Technology Files
- Data Transfer Wizard - Schematic Designs
- Data Transfer Wizard - Schematic Profiles
- Data Transfer Wizard - Schematic Symbols
- Data Transfer Wizard - Schematic Technology Files
- Align
- Capture Window
- Clip Construction Line
- Component Variant Spreadsheet
- Copy
- Create Breakout Tabs
- Cross Probe
- Cut
- Cut Shape
- Cut To Block
- Cut Track
- Delete
- Display Power Plane
- Drag & Drop Attribute Text
- Duplicate
- Edit Attributes Spreadsheet
- Find Relative Origin
- Find XY Position
- First Error
- Highlight Selection
- Measure
- Paste
- Redo
- Remove Breakout Tabs
- Remove Highlights
- Replicate
- Resolve Net Names
- Resolve Net Names - Dialog Detail
- Type Coordinate and Type Offset and Type Pin Name and Copy With Offset
- Type Pin Name
- Undo
- Application Error
- Back Annotate
- Choose Folder
- Close
- Enable Dynamic Checking
- Exit
- Files Of Type
- Import ECO
- New - Designs, Technologies & Profiles, Wizards
- Open
- Open and Close Pages
- Part Technology
- PCB Design Editor
- PCB Design Wizard
- PCB Documentation Symbol Type
- PCB Footprint
- PCB Profile
- PCB Technology
- Print to PDF
- Printing
- Recent Files
- Save and Save All
- Save As and Save Copy As
- Save Configuration
- Save Technology
- Save To Documentation Symbol Library
- Save To Library
- Schematic Documentation Symbol Type
- Schematic Profile
- Schematic Technology
- Schematics Design Editor
- Schematics Symbol Editor
- Switch between Schematic and PCB
- Technology Files
- Import Component Placement CSV Data
- Import DXF
- Import Gerber
- Import Pin Data in to the Part Editor
- Importing Altium Designer and Protel Schematic Designs
- Importing Altium Designer Files
- Importing Ariadne Designs
- Importing Ariadne Schematic Designs
- Importing Cadence Allegro Designs and Libraries
- Importing Cadstar Files
- Importing DxDesigner Designs
- Importing DxDesigner Files
- Importing Eagle Designs
- Importing Eagle Files
- Importing Eagle Files using ULP Files
- Importing EDIF 2.0.0 Format Files
- Importing EDWin ASCII Databases
- Importing EDWin Databases
- Importing Electronic Workbench and MultiSIM Files
- Importing Footprint Libraries From Other Systems
- Importing IDF Files
- Importing Integra Files
- Importing Integra Projects
- Importing Netlists to create a new PCB
- Importing OrCAD Designs
- Importing OrCAD Files
- Importing PADS Files
- Importing PADS Schematic Designs
- Importing Part and Net data from CSiEDA Schematics
- Importing Parts Libraries From Other Systems
- Importing PCB Designs From Accel and P-CAD
- Importing PCB Designs From Altium Designer and Protel
- Importing PCB Designs From Ariadne
- Importing PCB Designs From Cadstar using CPA format
- Importing PCB Designs From Other Systems
- Importing PCB Designs From Other Systems
- Importing PCB Designs From P-CAD using the PDIF format
- Importing PCB Designs From PADS
- Importing PLX Files into Pulsonix
- Importing Protel Files
- Importing Schematic Designs From Other Systems
- Importing Schematic Designs From Other Systems
- Importing Schematic Designs From P-CAD using the PDIF format
- Importing Seica Netlist
- Importing Symbol Libraries From Other Systems
- Importing System Designer Designs
- Importing Ultimate Files
- Importing Viewdraw Files
- Importing Visula Cadif
- Importing Visula Cadif Designs
- Importing Viva Attributes
- Mapping Ariadne Layers
- Mapping Cadif Layers
- Mapping EDA System Layers
- Part Mapping Editor
- Choose Bus Net
- Connect Guides
- Default Profiles
- Generate Block Symbol Specification
- Hierarchy Overview
- Hyperlink Attributes
- Insert - Inserted Graph
- Insert - Mounting Hole
- Insert - Testpoint
- Insert Area
- Insert Attribute
- Insert Attribute Position
- Insert Bitmap
- Insert Block Instance
- Insert Block Port
- Insert Board
- Insert Board Origin
- Insert Bond Pad
- Insert Branch Point
- Insert Breakout
- Insert Bus
- Insert Bus Reference
- Insert Bus Route
- Insert Bus Route
- Insert Circle
- Insert Component (SCM)
- Insert Component Name
- Insert Connection (PCB)
- Insert Connection (Schematic)
- Insert Connector Pin
- Insert Construction Line
- Insert Copper
- Insert Cutout
- Insert Die Pad
- Insert Drill Table
- Insert Ellipse
- Insert Embedded View
- Insert Flexi Bend Line
- Insert Free Pad
- Insert Layer Stack Preview
- Insert Line
- Insert Multiple Items
- Insert Net Label
- Insert Pad
- Insert Page
- Insert Page Link
- Insert Panel Outline
- Insert PCB Component
- Insert PCB Design
- Insert PCB DOC (Documentation) Symbol
- Insert Pin
- Insert Polygon
- Insert Rectangle
- Insert Schematic Doc (Documentation) Symbol
- Insert Shape Item
- Insert Shapes Overview
- Insert Signal Reference
- Insert Spiral
- Insert Spline
- Insert Star Point
- Insert Template
- Insert Text
- Insert Text Callout
- Insert Track
- Insert Triangle
- Insert User Report
- Insert Via
- Insert Wave
- Insert Wire Link
- Linking Schematics Pages
- Merge
- Multi Connect
- Save Profile
- Select Block Port
- System Attributes
- Add To Net
- Apply Predefined Signals
- Auto Correct Track
- Change Rotation Step
- Check Out Part and Footprint and Symbol (From Vault) And Edit
- Closed Shape
- Command
- Curved Mitre
- Default Keys
- Define Functional Logic Names
- Deselect All
- Differential Pairs
- Disconnect Connection End
- Disconnect Track End
- Edit Arc
- Edit Attribute Value
- Edit Breakout
- Edit Bus
- Edit Footprint In Library
- Edit Mode
- Edit Part In Library
- Edit Schematic Connection
- Edit Segment
- Edit Segment Menu
- Edit Shape
- Edit Symbol In Library
- Edit Symbol In Place
- Edit Track
- Edit Track Width using Impedance Value
- Fetch Component
- Filled Shape
- Find Library Item
- Flip Selection
- Frame Select
- Free Pads to Vias
- Import Functional Logic Names
- Latch Mode
- Magnifier
- Manual Placement
- Manual Routing
- Merge Shapes
- Mitre and Fillet Corner
- Mouse Wheel Button
- Move
- Move Corner
- Move To Bin
- Next Part Representation
- Place Inserted Graph
- Polygon Select
- Rearrange Multiple Items
- Remove From Net
- Replicate Shape As
- Reposition Design
- Reset Panel Layout
- Resize Shape
- Restricted Segment Movement
- Rotate
- Scale
- Select All
- Select All Gates
- Select All Visible
- Select Mode
- Select Next
- Select Path
- Select Pin Network Pin
- Select Previous
- Shape Editing Overview
- Sketch Track
- Split Nets
- Swap Layer
- To Mounting Hole
- Type Rotate
- Use Default Track and Via Style
- Wildcard Wizard
- Wildcards
- Creating and Editing a 3D Package
- Edit 3D Package
- Folder Name
- Legacy 3D View
- Libraries - Copy and Move Items
- Libraries - Find Footprints
- Libraries - Find Footprints in 3D Packages
- Libraries - Find Symbols
- Libraries - Make Libraries from Parts
- Libraries - Parts
- Libraries - Parts Library Attributes
- Libraries - Parts Library Report
- Libraries - PCB Doc Symbols
- Libraries - PCB Footprints
- Libraries - Rename Items
- Libraries - Schematic Doc Symbols
- Libraries - Schematic Symbols
- Libraries - Spice Models
- Libraries - Swap Symbols
- Libraries - Symbol Library Report
- Libraries Overview
- Library Manager - 3D Packages
- Library Toolkit
- Loading And Using Libraries
- Regenerate Footprint Library Indexes
- Regenerate Part Library Indexes
- Rename Style
- Save Items To Library
- Schematic Doc Symbol Editor
- Using PCB Libraries
- Using Schematic Libraries
- Auto Corner
- Auto Necking
- Display DRC Clearances
- Online DRC Errors
- Options - Design Backups
- Options - Display
- Options - Edit Breakout
- Options - Edit Connection (SCM)
- Options - Edit File Extensions
- Options - Edit Shape
- Options - Edit Track
- Options - File Extensions
- Options - Find
- Options - General
- Options - Interaction (PCB)
- Options - Interaction (SCM)
- Options - Macros
- Options - Move
- Options - Multi-Screen
- Options - Online DRC
- Options - Online ERC
- Options - Pan & Zoom (PCB)
- Options - Resolve Net Names
- Options - Select
- Options - Synchronise
- Options - Tooltips
- Options - Track Length Limits
- Options - Warnings
- Orthogonal Mitre
- Safeguard Your Data With Backups
- Segment Mode
- Setting Up User Defined Options
- Warnings
- CAM Plot - Plot Settings
- Composite Plots
- Excellon Setup
- Export ODB++
- Final Design Checks Before Manufacturing
- IDF Output
- Interactive HTML BOM Export
- Output CAM and Plot
- Output GenCAD
- Output HyperLynx
- Output STL
- Output UniDAT
- PDF Setup
- Pen Colour Setup
- Pen Count Setup
- Pen Plot Setup
- Plot Overview
- Plot Position and Preview
- Plot Warnings
- Plotting The Design
- Split Power Planes
- Step and Repeat in CAM Plots
- Windows Setup
- Check Pin Mappings
- CSV Pin Data
- FPGA Support in Pulsonix
- Part Family
- Parts Editor
- Parts Editor - Add Attribute
- Parts Editor - Associated Parts
- Parts Editor - Change Gate Order
- Parts Editor - Change Gate Symbol
- Parts Editor - Change Part Type
- Parts Editor - Change Representation Order
- Parts Editor - Delete Attribute
- Parts Editor - Details
- Parts Editor - Edit Footprints
- Parts Editor - Edit Pin Count
- Parts Editor - Force Attribute Visibility
- Parts Editor - Gates
- Parts Editor - Insert Gate
- Parts Editor - Insert Part Representation
- Parts Editor - Mapping Multiple PCB Pads to the same SCM Pin
- Parts Editor - Name Pins by Row and Col
- Parts Editor - Parts & Attributes
- Parts Editor - Pins
- Parts Editor - Update Part
- Properties
- Properties - (Item) Attribute
- Properties - Add and Edit Attribute
- Properties - Add Net to Bus
- Properties - Alternate Part From Family
- Properties - Area
- Properties - Associated Parts in a Design
- Properties - Associated Parts on Components
- Properties - Attributes
- Properties - Back Drill
- Properties - Bitmap
- Properties - Block Instance
- Properties - Block Instance - Block
- Properties - Block Instance - Block Instance
- Properties - Block Ports
- Properties - Board
- Properties - Board 3D Origin
- Properties - Board Bend Line
- Properties - Board Origin
- Properties - Branch Point
- Properties - Branch Point Symbol
- Properties - Breakout
- Properties - Bus
- Properties - Bus Route
- Properties - Bus Terminal
- Properties - Comp Attributes
- Properties - Component
- Properties - Component Variants
- Properties - Component Via
- Properties - Connector Pin
- Properties - Construction Line
- Properties - Coordinate System Origin
- Properties - Differential Pair
- Properties - Dimension
- Properties - Dimension Arrows
- Properties - Dimension Doc Lines
- Properties - Dimension Text
- Properties - Dimension Tolerance
- Properties - Documentation Symbol
- Properties - Drill Table
- Properties - Edit Associated Parts
- Properties - Embedded View
- Properties - Error (PCB)
- Properties - Error (SCM)
- Properties - Gate
- Properties - Group
- Properties - Inserted Graph
- Properties - Junction
- Properties - Line Style
- Properties - Mounting Hole
- Properties - Net (SCM)
- Properties - Net Attributes
- Properties - Nets on Pins
- Properties - Pad
- Properties - Panel PCB Design
- Properties - Panel PCB Instance
- Properties - PCB Connection
- Properties - PCB Net
- Properties - PCB Panel Origin
- Properties - Pin
- Properties - Relative Coordinate Origin
- Properties - SCM Connection
- Properties - SCM Doc Symbol and Signal Reference Pin
- Properties - Scm Hierarchy Block - Block
- Properties - Segment
- Properties - Serpentine
- Properties - Shape
- Properties - Signal Path
- Properties - Signal References
- Properties - Star Point
- Properties - Star Point Symbol
- Properties - Sub Net
- Properties - Symbol Origin
- Properties - Teardrop
- Properties - Template
- Properties - Test
- Properties - Text
- Properties - Text Callout
- Properties - Text Style
- Properties - Track
- Properties - Ungated Pins
- Properties - User Report
- Properties - Variant Attributes
- Properties - Variants
- Properties - Vault
- Properties - Via
- Properties - Wire
- Report Maker - Angle Units Command
- Report Maker - Append Report Command
- Report Maker - Area Commands
- Report Maker - Associated Parts Commands
- Report Maker - Attribute Command
- Report Maker - Attribute In Library Commands
- Report Maker - Back Drill Span Commands
- Report Maker - Blank Line Command
- Report Maker - Block Name and Block Instance Name Command
- Report Maker - Comment Command
- Report Maker - Common Dialog Details
- Report Maker - Component Name and Footprint Name and Part Name and Symbol Name Commands
- Report Maker - Component Name Range Command
- Report Maker - Component Name Stem Command
- Report Maker - Coordinate Units Command
- Report Maker - CSV Command
- Report Maker - Database Check Command
- Report Maker - Database Status Command
- Report Maker - Database Value Command
- Report Maker - Default Footprint Name Command
- Report Maker - Differential Pair Commands
- Report Maker - Drawing Commands
- Report Maker - Drill Commands
- Report Maker - Edit Fixed Command
- Report Maker - Edit Get Name Command
- Report Maker - Edit List Command
- Report Maker - Edit List Field Command
- Report Maker - Edit List of Designs
- Report Maker - Edit Value Command
- Report Maker - End Node and Start Node Commands
- Report Maker - End Of Line Command
- Report Maker - Error Commands
- Report Maker - Excel Command
- Report Maker - Extents Command
- Report Maker - Finish and Cancel Report Commands
- Report Maker - Fixed Column Output Command
- Report Maker - Format Description Command
- Report Maker - Gates Command
- Report Maker - Group Commands
- Report Maker - HTML Command
- Report Maker - HTML Heading Text Command
- Report Maker - HTML Image Command
- Report Maker - HTML Table Command
- Report Maker - IF, ELSE commands
- Report Maker - Is Command
- Report Maker - Layer Command
- Report Maker - Layer Commands
- Report Maker - Layer Span Commands
- Report Maker - Length Command
- Report Maker - Library Item Fields
- Report Maker - Line Length Command
- Report Maker - Line Number Command
- Report Maker - List Ascii File Lines Command
- Report Maker - List Component Group Command
- Report Maker - List Count Command
- Report Maker - List of Command
- Report Maker - List of Designs Command
- Report Maker - List of Files Command
- Report Maker - Logic Name Command
- Report Maker - Multi Line Text Command
- Report Maker - Net and Sub Net Commands
- Report Maker - Net Name, Net Class and Net Type Commands
- Report Maker - New Line If Full Command
- Report Maker - New Report Format
- Report Maker - Node Name Command
- Report Maker - Not Unicode Command
- Report Maker - Number Format Command
- Report Maker - Options
- Report Maker - Pad and Type Command
- Report Maker - Pad Attribute Command
- Report Maker - Pad Style Command
- Report Maker - Page Name and Page Number Commands
- Report Maker - Panel Design Commands
- Report Maker - Part Representations, Gates and Pins
- Report Maker - PCB Design Level Commands
- Report Maker - PDC Record Command
- Report Maker - PDF Command
- Report Maker - Pin Count Command
- Report Maker - Position Command
- Report Maker - Report File Name Command
- Report Maker - Report Prompt
- Report Maker - Rotation Commands
- Report Maker - Rule Check Command
- Report Maker - Rules Commands
- Report Maker - Run Report Command
- Report Maker - Scale Command
- Report Maker - Selection Command
- Report Maker - Set Alternate Attributes
- Report Maker - Set Clip Area
- Report Maker - Set Layer
- Report Maker - Set Report Group
- Report Maker - Shape Commands
- Report Maker - Side Command
- Report Maker - Signal Path Commands
- Report Maker - Specialised Part Fields
- Report Maker - Standard Report Header Command
- Report Maker - Step And Repeat Command
- Report Maker - Testpoint Name Command
- Report Maker - Text Command
- Report Maker - Top and Bottom Height Commands
- Report Maker - Track Length Commands
- Report Maker - Transform Coordinates Command
- Report Maker - Types of Command
- Report Maker - Underline Command
- Report Maker - Value Detail
- Report Maker - Variable Command
- Report Maker - Variants Commands
- Report Maker - Vault Commands
- Report Maker - Via Commands
- Report Maker - View Report Command
- Report Maker - While Command
- Report Maker - Width and Height Commands
- Report Maker Commands
- Report Maker Overview
- Define Source
- Pulsonix Spice Simulation - Overview
- Simulation - Autoplace Bias Voltage Markers
- Simulation - Bias Annotation
- Simulation - Create Netlist As Subcircuit
- Simulation - Define AC Source
- Simulation - Define Analog To Digital Converter
- Simulation - Define Block Spice Type
- Simulation - Define Bode Plot Probe
- Simulation - Define Bus Probe
- Simulation - Define Bus Register
- Simulation - Define Component Value
- Simulation - Define Counter
- Simulation - Define DC Source
- Simulation - Define Digital Initial Condition
- Simulation - Define Digital Pulse
- Simulation - Define Digital To Analog Converter
- Simulation - Define Ideal Transformer
- Simulation - Define Laplace Device
- Simulation - Define Logic Gate
- Simulation - Define Noise Source
- Simulation - Define Potentiometer Values
- Simulation - Define Probe
- Simulation - Define PWL Source
- Simulation - Define Random Probe
- Simulation - Define Saturable Transformer and Inductor
- Simulation - Define Shift Register
- Simulation - Define Simulator Control
- Simulation - Define Spice Pin Properties
- Simulation - Define Spice Template
- Simulation - Define Spice Type
- Simulation - Define Transmission Line Parameters
- Simulation - Define Value
- Simulation - Define Waveform Generator
- Simulation - Delete Bias Voltage Markers
- Simulation - Edit Parameter
- Simulation - Edit Spice Value Text
- Simulation - Export LTSpice Netlist
- Simulation - Extra Simulation Data
- Simulation - Functional Modelling
- Simulation - Hide Bias Voltage Values
- Simulation - Import Models
- Simulation - Insert Bias Current Marker
- Simulation - Insert Bias Voltage Marker
- Simulation - Insert Part Using Model
- Simulation - Match Components
- Simulation - Monte Carlo
- Simulation - Monte Carlo Tolerances
- Simulation - Old Method of Defining Saturable Devices
- Simulation - Parameterised Devices
- Simulation - Plot Histogram
- Simulation - Random Probing
- Simulation - Saturable Magnetic Devices
- Simulation - Select Model
- Simulation - Set Match Tolerance
- Simulation - Set Netlist Spice Type
- Simulation - Set Tolerance
- Simulation - Show Spice Value
- Simulation - Simulation Parameters
- Simulation - Simulator Setup Dialog
- Simulation - Update Bias Voltage Values
- Spice Simulation - Overview
- Specctra Wizard - Breakout
- Specctra Wizard - Choose Layers
- Specctra Wizard - Defaults (Grids)
- Specctra Wizard - Files
- Specctra Wizard - Finish
- Specctra Wizard - Mitre
- Specctra Wizard - Nets
- Specctra Wizard - Pin to Pin Limits
- Specctra Wizard - Protect
- Specctra Wizard - Routing Costs
- Specctra Wizard - Routing Types
- Specctra Wizard - Start
- Specctra Wizard - Testpoints
- 3D - Detect Clashes
- 3D - Exploded View
- 3D - Measure
- 3D Connexion Space Mouse
- Board Bending in 3D Overview
- Flexi Bend Lines
- Fold Board option
- Fold Flexi Boards option
- Generate Height Attributes From STEP Models
- IDX Collaboration
- IDX Collaboration Settings
- IDX Layer Mapping
- IDX Workflow
- Importing Component Position Changes from a STEP file
- Library Manager - STEP Models
- Output STEP File
- Position STEP Model
- Save STEP Models
- STEP - Moving items
- Using STEP Models and Attributes
- Using the 3D Viewer Functionality - Getting Started
- Allowed Drill Sizes
- Autogenerate CAM Plots
- Autogenerate CAM Plots
- Back Drilling Overview
- CAM Plots
- CAM Plots - Schematic
- Create Signal Path In Design
- Drill Size Table
- Merge Styles
- New Chain - Differential Pair Chains
- Select Pin Network Part
- Styles and Spacings and Rules By Area
- Technology - Adjacent Nets Rules
- Technology - Anti Pad Rules
- Technology - Area Attribute Rules
- Technology - Area Rules
- Technology - Attribute Names
- Technology - Back Drill Auto Generate
- Technology - Back Drill Rules
- Technology - Back Drill Spans
- Technology - Barcode, QR Code, Data Matrix Code Text Fonts
- Technology - Component Place Rules
- Technology - Component Variants Rules (SCM)
- Technology - Connection Style Naming
- Technology - Connection Styles
- Technology - Copper Antennae Rules
- Technology - Copper Check Rules
- Technology - Copper Neck Width Rules
- Technology - Copper Pour Rules
- Technology - Create Signal Path Dialog
- Technology - Create Sub Net Dialog
- Technology - Creepage Rules
- Technology - Define Pad Shape
- Technology - Differential Pair - Create Pairs From Rules
- Technology - Differential Pair Gap Rules
- Technology - Differential Pair Net Rules
- Technology - Differential Pair Skew Rules
- Technology - Differential Pairs
- Technology - Edit Footprint Rules Attribute
- Technology - Edit Pin Network Part
- Technology - Edit Pin Type Pair Rule
- Technology - Export and Import Layers
- Technology - Export and Import Rules
- Technology - Footprint Rules
- Technology - Footprint Rules Details
- Technology - Group Names
- Technology - Hatch Style Naming
- Technology - Hatch Styles
- Technology - Layer Change Length
- Technology - Layer Class
- Technology - Layer Spans
- Technology - Layer Stack Preview
- Technology - Layers
- Technology - Line Style Naming
- Technology - Line Styles
- Technology - Loop Antennae Rules
- Technology - Materials
- Technology - Navigating Technology Grids and Dialogs
- Technology - Necked Length Rules
- Technology - Net Classes
- Technology - Net Items
- Technology - Net Names (PCB)
- Technology - Net Names (SCM)
- Technology - Net Styles
- Technology - Pad Style Naming
- Technology - Pad Styles
- Technology - Pad Styles Naming Settings
- Technology - Pad Track Neck Rules
- Technology - Pin Networks
- Technology - Pin Style Naming
- Technology - Pin Styles
- Technology - Pin Styles Naming Settings
- Technology - Pin Type Pair Rules
- Technology - Pin Types
- Technology - Reset Layer Class Values
- Technology - Return Path Rules
- Technology - Rules
- Technology - Rules and Attributes
- Technology - Serpentine Rules
- Technology - Signal Paths
- Technology - SMD Rules
- Technology - Spacing Rules
- Technology - Stub Routing Length Rules
- Technology - Style Naming
- Technology - Style Naming Rules
- Technology - Sub Nets
- Technology - Suppress Land Rules
- Technology - Teardrop Rules
- Technology - Testpoint Rules
- Technology - Text Style Naming
- Technology - Text Styles
- Technology - Thermal Rules
- Technology - Track And Via Size Limit Rules
- Technology - Track Impedance Rules
- Technology - Track Length Factor Rules
- Technology - Track Length Match Rules
- Technology - Track Length Rules
- Technology - Track Parallel Rules
- Technology - Track RF Rules
- Technology - Track Style Naming
- Technology - Track Styles
- Technology - Via Rules
- Technology Overview
- Using Schematic Technology Track & Via Size Limit Rules to Create Net Styles in PCB
- API
- Apply Layout Pattern
- Auto Footprints
- Auto Gate and Pin Swap
- Auto Mitre
- Create Breakout Pattern
- Customise - Application Look
- Customise - Edit Button Image
- Customise - Toolbar and Menu Button Appearance
- Customise Dialog Overview
- Design Revision Analyser
- Design Rule Check
- Design Rule Check in Panel Editor
- Electrical Rules Check
- Fatten and Neck Track
- Generate Component
- Join Open Shapes
- Mounting Hole to Pad
- Optimise Gates
- Place Around Board
- Pull Tight Tracks
- Rename
- Replace Part
- Reverse Engineer
- Run Command
- Run Script
- Running Python Scripts
- Serpentine Routing
- Show and Hide Attribute Name Columns
- Smooth Tracks
- Synchronise Designs
- Translate To PCB
- Using Autorouters With Pulsonix
- Apply Vias and Pads
- Browse Nets Dialog
- Clear Template
- Conversion Calculator
- Delete Unfinished Tracks
- Groups
- Hatch
- Heat Sink Calculator
- Load Attribute From Library
- Lock
- Optimise Nets
- Ordered Template Pour
- Place Bond Pads
- Pour Copper
- Pour Copper Locked Items Dialog
- Reload Block
- Reload From Library
- RLCF Calculator
- Scientific Calculator
- Set Pour Order
- Share PCB Tracks or Schematic Connections
- Show and Hide Net Names
- Spread Out
- Swap Component Positions
- Swap Gates
- Swap Pins
- Track Impedance Calculator
- Track Width Calculator
- Trim or Extend Segment
- Unlock
- Unroute Nets
- Update Back Drills
- Update Drill Tables
- Update Layer Stack Previews
- Update User Reports
- Via Resistance Calculator
- Check Out Library Item
- Copy Out Library Item
- Vault - Attributes
- Vault - Audit Trail
- Vault - Browse Associated Design
- Vault - Browse Folder
- Vault - Change ODBC Driver
- Vault - Check In Library Item
- Vault - Check Into Vault
- Vault - Check Out Design Item
- Vault - Check Out From Vault
- Vault - Choose Library
- Vault - Colours
- Vault - Copy Out
- Vault - Copy Out Design Item
- Vault - Designs to Vault
- Vault - Detach From Vault
- Vault - Enter Next Vault Revision
- Vault - Enter Vault Item to be Replaced
- Vault - Export Vault Libraries
- Vault - Folder Name
- Vault - Generic Files to Vault
- Vault - Groups
- Vault - Import Vault Libraries
- Vault - Item Permissions
- Vault - Item Status
- Vault - Libraries to Vault
- Vault - Options
- Vault - Overview
- Vault - Reports
- Vault - Revision Naming
- Vault - Sign In
- Vault - Status
- Vault - Uncheck From Vault
- Vault - Update Cross References
- Vault - Users
- Vault - Version
- Vault - View Global Permissions
- Vault Browser
- Vault Browser - Add PCB From Vault
- Vault Browser - Search
- Vault Folders
- Vault Installation and Getting Started
- Colour Files Bar
- Component Bin
- Design Browser
- Dockable Windows
- DRC Errors Browser
- ERC Errors Bar
- Find Bar
- Frame View
- Full Screen Mode
- Inspector Bar
- Inspector Bar - Change Group Order
- Layers Bar
- Pan
- Part Browser
- Part Browser - Part Browser Categories
- Previous View
- Repaint
- Reverse Layer Order
- Reversed View
- Rules Spreadsheet Bar
- Scroll Bars
- Select Mask Bar
- Shape Information Bar
- Status Bar
- Swap View
- Toggle Layer
- Toggle Layers Bar
- Toolbars
- View Actual Size
- View Board
- View Extents
- View Highlighted
- View Selection
- Workbook Mode
- World View
- Zoom In
- Zoom Out